Tổng hợp khác

In/Out unit DN21000S

2.630.000đ

ID tin: 3551451 - Gửi lúc: 14:12, 01/07 - Hà Nội

Đã xem: 56 Bình luận: 0

Lưu tin

congnghiep90

Technical Data Input Input signal
(calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V Input resistance Current input
Voltage input ≤ 35 Ohm
≥ 100 kOhm Overload Current input
Voltage input < 50 mA
< 30 V Transmitter supply Tx
(switchable) 16 V (open circuit voltage/short circuit current ≤ 22 V/35 mA) Output I + II Output signal
(calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V Load Current output: ≤ 6 V (300 Ohm at 20 mA) Voltage output: ≤ 5 mA (2 kOhm at 10 V) Linear transmission range -1 to +110 % Residual ripple < 10 mVrms General Data Transmission error < 0.1 % full scale Temperature coefficient 1) < 100 ppm/K Cut-off frequency -3 dB 5 kHz Response time T99 150 µs Test voltage 3 kV AC, 50 Hz, 1 min, Input against Output I against Output II against power supply Working voltage 2)
(Basic Insulation) 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 Protection against electrical shock Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits. Ambient temperature Operation
Transport and storage –25 °C to +70 °C (-13 to +158 °F)
–40 °C to +85 °C (-40 to +185 °F) Power supply 24 V DC, voltage range 16.8 V to 31.2 V DC, approx. 1.4 W EMC 3) EN 61326-1 Approvals UL (USA/Canada): UL 61010, Class I, Div. 2
ATEX / IECEx: Zone 2 (nA) Construction 6.2 mm (0.244") housing, protection class: IP 20
mounting on 35 mm DIN rail acc. to EN 60715 Weight Approx. 70 g

Các sản phẩm trong tin đăng